portfolio

Setting Up the Development Environment

Course Content
Session 1: Introduction to ESP32
Objective: Get familiar with the ESP32 microcontroller and set up the development environment.
0/5
Session 2: Interfacing with Sensors and Displays
Learn how to connect a DHT22 sensor and an OLED display to the ESP32.
0/4
Session 4: Programming the OLED Display
Objective: Write code to display information on the OLED display.
0/4
Session 5: Integrating Sensor Data with OLED Display
Objective: Combine sensor readings with OLED display functionality.
0/1
Session 6: Setup WIFI Capability
0/1
Session 7: Adding a Webserver
0/1
Session 8: Wrap-up
0/1
ESP32 Basics
About Lesson

A. Installing Required Libraries

  • Arduino IDE Setup:
    • Ensure the ESP32 board is installed in the Arduino IDE (as outlined in the previous lesson).
    • Open Arduino IDE and go to Sketch → Include Library → Manage Libraries.
    • Search for “Adafruit SSD1306” and “Adafruit GFX” libraries. Install them.

B. Checking and Installing Libraries

  • Ensure that the libraries are installed correctly.
  • Demonstrate how to check installed libraries in the Arduino IDE.